Фильтр mch-6
Модераторы: трофи, DukeSS, KWAK
Здравствуйте, фильтр забит углём. В каких пропорциях поменять наполнитель на микросито+уголь?
Я так понял 2/3 сито 1/3 угля)
- Smusmumrik
- Активный участник
- Сообщения: 925
- Зарегистрирован: 20-01-2007 23:05
- Откуда: Санкт-Петербург
http://www.rebreatherworld.com/showthre ... ble-filter
http://cloud.tapatalk.com/s/57629648196 ... 0Adder.pdf
Packing with molecular sieve, activated carbon and hopcalite (petrol-powered compressor)
This is the same as for the P21 (in both cases, the O ring end is the "clean" end) except for the following:
A suggested amount for packing (and order) is as follows:
30% = 20mL (carbon)
10% = 6mL (hopcalite)
60% = 68mL (mol sieve)
Packing with molecular sieve and activated carbon (electric-powered compressor)
This is the same as for the P21 (in both cases, the O ring end is the "clean" end) except for the following:
A suggested amount for packing (and order) is as follows:
30% carbon = 25mL
70% mol sieve = ~70mL
http://cloud.tapatalk.com/s/57629648196 ... 0Adder.pdf
Packing with molecular sieve, activated carbon and hopcalite (petrol-powered compressor)
This is the same as for the P21 (in both cases, the O ring end is the "clean" end) except for the following:
A suggested amount for packing (and order) is as follows:
30% = 20mL (carbon)
10% = 6mL (hopcalite)
60% = 68mL (mol sieve)
Packing with molecular sieve and activated carbon (electric-powered compressor)
This is the same as for the P21 (in both cases, the O ring end is the "clean" end) except for the following:
A suggested amount for packing (and order) is as follows:
30% carbon = 25mL
70% mol sieve = ~70mL
Спасибо